Nitrogen Equipment
1. Low energy: the motor used by the equipment, is a national level certified product, which is effective to save electricity.
2. High pressure: nitrogen exit pressure can be realized 0 ~ 35 bar
Convenient use: Take air as a raw material, directly produce high purity nitrogen, dry air, easy to use.
3. Dual Output Media: The entire device can achieve both nitrogen, two gas media, satisfying the cutting air, nitrogen switching gas demand.
Fiber laser cutting special nitrogen equipment
Machine principle
Transformer Adsorption Gas Separation Technology (PSA) is separated from the mixed gas by using the adsorbent to the target gas with high adsorption capacity and higher adsorption selectivity.
Adsorption selectivity refers to the ability to adsorb for some gases. If the target gas in the mixed gas is different from the adsorption behavior of other component gas on the adsorbent, the larger the difference in adsorption behavior, indicating that the adsorbent is more different from the target gas and other gas selectivity, the less the target gas is easily Separate.
When the treated compressed air is passed through the adsorbent, the O2 component in the air is higher than the N2 component, so the O2 component prior adsorption is preferentially adsorbed, thereby obtaining high purity nitrogen.
Nitrogen flow
The air compressor produces high-pressure air. After air treatment system, the air treatment system removes magazines in the air compressor, thereby obtaining a high-clean high-pressure air, and then pass through the PSA nitrogen system, so that nitrogen is separated from oxygen, thereby obtaining High purity nitrogen, high-pure nitrogen passes through a nitrogen compressor to increase high pressure, high pure nitrogen supply to a nitrogen compressor.
Performance technical parameters
Model: XK-I XK-II XK-III XK-IV XK-V
Nitrogen displacement (nm3 / h) : 10/25/40/60/100
Rated power (kW) :10/22/34/45/60
Power consumption (kW / h) : 7/15/22/30/40
Nitrogen purity (%): ≥99.99
Maximum exhaust pressure (MPa) : 2.5 3.0
Orthopedic nitrogen dew point (° C): ≤ -55
Oil content (PPM): 0.003
Content (μm): 0.01
Adapt to ambient temperature (° C): -10-45
Adapt to environmental humidity (%): 10-80
Noise rating (DB (a)): 72/75
Power supply :380V / 3PH / 50Hz
Size (mm): 2500 × 1500 × 2000 3200 × 2000 × 2600 4500 × 2300 × 2600
Weight (kg) :1570/2340/2950/3300
Model | XK-I | XK-II | XK-III | XK-IV | XK-V |
Nitrogen Displacement （Nm³/h） | 10 | 25 | 40 | 60 | 100 |
Power（kW） | 10 | 22 | 34 | 45 | 60 |
Power Consumption （KW/H） | 7 | 15 | 22 | 30 | 40 |
Nitrogen Purity（%） | ≥99.99 | ||||
Maximum Exhaust Pressure （MPa） | 2.5 | 3.0 | |||
Atmospheric nitrogen dew point（℃） | ≤-55 | ||||
Oil content（ppm） | 0.003 | ||||
Dust content（μm） | 0.01 | ||||
Adapt to ambient temperature（℃） | -10~45 | ||||
Environment humidity（%） | 10~80 | ||||
Noise level（dB（A）） | 72 | 75 | |||
Electricity supply | 380V/3PH/50Hz | ||||
Size（mm） | 2500×1500×2000 | 3200×2000×2300 | 4500×2300×2600 | 4800×2300×2600 | |
Weight（kg） | 1570 | 2340 | 2950 | 3300 | |